LINX - управление и контрол

Какво е LINX?

Новото поколение на 4х4 аксесоари

LINX is a unique modern controller that declutters the dashboard and centralises the command of vehicle accessories by replacing classic switches, gauges and monitors with one sleek and smart driver interface. Built on an expandable platform, LINX will continue to evolve your on and off road driving experience both now and into the future.

Experience total control

Fitting out a modern 4×4 with a range of accessories such as driving lights, Air Lockers, dual batteries and air compressors can quickly lead to a dash full of out of place, hard to reach switches and a myriad of gauges and monitors either stuck to the windscreen or drilled into the dashboard – not to mention all the associated fuses and wiring.

LINX offers a single point of control via its user-friendly, Bluetooth enabled, mobile touch screen display. The LINX mobile display mounts conveniently and unobtrusively within reach of the driver while the main control hub lies neatly out of sight under the dash or seat; taking care of all accessory wiring.

Modules

FRONT AND REAR TRACTION

This module operates the front and rear Air Lockers quickly and efficiently, automatically sensing driver input and activating the compressor as required. It is capable of switching each locker independently or allowing the front locker to be activated only when the rear locker is engaged first (a traditional safety feature).

COMPRESSOR AND PRESSURE CONTROL

This module takes tyre inflation and deflation to the next level. Simply connect the air hose from your vehicle-mounted compressor to the tyre valve and current pressure is displayed on the LINX screen. Inputting a target pressure automatically inflates or deflates to your desired level with the pressure shown in real time on
the display.

CLOCK

The clock module shows the time of day in 12- or 24-hour format and can be used as a countdown timer, alarm and stopwatch.

ACCESSORY SWITCHBOARD

Operate any six types of 12V accessories at your fingertips with this module. Each accessory can be customised to switch on or off by user input and/or automatically by ignition, high beam headlamps, low beam headlamps or reversing lamps.

BATTERY MONITOR

Battery capacity is always an issue for serious 4WDers. LINX allows you to monitor up to three batteries simultaneously, with the added ability to set low voltage alarms on each. This ensures your beer stays cold and you are never left without enough power to start your vehicle.
SPEEDOMETER

Speedometer inaccuracies are a common occurrence. The LINX Speedometer built-in GPS ensures an accurate reading at all times, even taking into account different tyre sizes. It also shows your altitude and compass bearing and allows for speed limit warnings to be set.

AIR SUSPENSION CONTROL

Many 4WDers install airbag suspension systems to help carry the occasional loads associated with towing boats, camper trailers and caravans. LINX can control up to four airbags allowing for levelling
of the vehicle side to side and front to rear. Users can preset up to four pressure modes, such as “daily drive”, “caravan”, “garden trailer”, “boat”, all with personalised pressure settings

INCLINOMETER

The inclinometer module measures and displays your vehicle’s incline and angle. Users can set a pitch and roll warning limit to suit their vehicle so an alarm sounds when the set limit is approaching.

FRIDGE CONTROL

Control up to two fridges with the touch of a button and ensure you have the coolest food and drinks on arrival at your destination.

TPMS

Keep track of your tyre pressure from in the cab and have peace of mind when travelling off road.

* Some modules optional

Fitting – What’s involved?

Depending on the vehicle model, the fitting process can take a few hours and is best performed by a trained ARB Technician.

Connecting your 12 V accessories such as compressor, Air Lockers and driving lights will vary depending on whether the accessory was fitted before or after your LINX installation. As LINX is customisable to your vehicle, contact your local ARB distributor for a quote and to discuss your individual requirements.

The initial set up of LINX involves the following:

  • Mounting of the controller (varies by vehicle)
  • Connecting the 4 input wires (from ignition, high beam headlamp, low beam headlamp and reverse lamp) to the controller
  • Connecting the power loom to the controller
  • Fit the mobile display screen with gimbal and optional vehicle specific mount bracket
  • Connecting the USB cable (hidden) from the controller to the mobile display screen
  • Checking and downloading any available models or latest software
  • Please note, vehicle specific A-Pillar mounts are sold separately from your authorized ARB store or stockist.

LINX Accessories

To complement LINX is a range of components and hardware to help you seamlessly
integrate optional accessories and your LINX display in vehicle.

Vehicle Specific Mounts

Designed to suit a large range of popular 4WDs, the optional LINX A-Pilar mounts position the LINX mobile display conveniently and unobtrusively within reach of the driver, providing an unobstructed view of the road.

Alternatively, each LINX comes with a universal LINX gimbal mount, allowing the display to be orientated to the desired position and set so that each time the display is returned to the vehicle it’s always in the optimal position.

LINX Pressure Control Kit

Offering ‘set & forget’ simplicity to tyre inflation as well as remote control over your airbag suspension, the optional LINX Pressure Control Kit (coupled with an ARB air compressor) allows you to take full advantage of LINX’s Pressure Control Module. Perfect for the easy and accurate adjustment of tyre pressures, or controlling a set of air bags, the wireless LINX’s mobile display means you can be in control from either within or out of the vehicle at up to 10m away.

The LINX Pressure Control Kit contains:

  • 1 x Pressure Regulator Valve (PRV)
  • 1 x Transducer
  • 2 x Wiring Looms

LINX Air Bag Isolation Kit

Adding an Air Bag Isolation Kit allows owners with air suspension to take full advantage of LINX’s Air Suspension Module providing the ability to independently adjust the pressure and ride height in each air bag. Perfect for when loads are added to a vehicle unevenly, levelling the vehicle from side to side (left to right) becomes a simple on-display adjustment.

Each Air Bag Isolation Kit contains:

  • 2 x Solenoids
  • 1 x Wiring Loom

Изборът на подходящи аксесоари изисква внимателното обмисляне на редица фактори нужни за правилния избор. Ние ще помогнем!

Предлагаме на запалените приключенци най-качествените продукти от световноизвестни марки. Продуктовата гама е много разнообразна и специфична за всеки автомобил и клиент. Превърнете Вашия автомобил от сериен в уникален.

Иновативност
Лично тестваме всяка техническа новост.
Ангажираност
Държим на гаранционното и извънгаранционното обслужване.
Професионализъм
Ние сме гъвкави и развиваме непрекъснато компетенциите си.
Качество
Ние търсим и рекламираме качеството.
 

 

ТЪРСИТЕ ОФРОУД ОБОРУДВАНЕ ЗА ВАШИЯ АВТОМОБИЛ?

 

 +359 888 524 330

 

НИЕ СМЕ НА РАЗПОЛОЖЕНИЕ ОТ ПОНЕДЕЛНИК ДО ПЕТЪК
ОТ 09:00 ДО 18:00 ЧАСА